Ripstop Sports Flag (210D Ripstop)
Proof before print: every order gets a digital proof for approval. Turnaround: printed in 24–48 h, delivered worldwide in 7–10 days. Trade accounts: volume pricing from 50 sq ft.
Ripstop Sports Flag (210D Ripstop) — Same Oxford body, with a reinforcement grid that stops a small tear becoming a big one, specified for sports banners.
A ripstop weave lays heavier reinforcement yarns into the ground cloth on a regular grid — you can see the faint squares if you hold it to the light. The grid does not make the fabric harder to tear in the first place; what it does is arrest a tear that has already started. A puncture from a cable tie or a snagged fixing stays a puncture instead of running down the panel.
Sports graphics live outdoors, get handled by crowds, and have to read at genuine distance — from the far side of a pitch, from the back of a stand, or through a television camera.
Best for
- Stadium perimeter and sponsor boards
- Championship and honours banners
- Team and locker-room banners
- Hand-held fan flags
- Match-day and hi-vis marshalling flags
Key advantages
- Reinforcement grid halts tear propagation — damage stays local instead of running with the grain
- Excellent strength for the weight, so panels stay manageable to rig and transport
- Well suited to repeat-use flags and wraps that get handled, folded and re-fixed often
- Holds tension across large spans without distorting the printed artwork
- The visible grid texture is subtle enough not to interfere with photographic imagery
Specifications
| Material & construction | Oxford weave with an interwoven ripstop reinforcement grid |
|---|---|
| Yarn denier | 210D |
| Fabric weight | 140 gsm |
| Print method | Dye-sublimation (colour transferred into the fibre) |
| Print sides | Double |
| Opacity | Opaque |
| Finish & feel | Firm woven surface with a faint reinforcement grid |
| Wind & breathability | Strong under load; the reinforcement grid keeps any damage local |
| Water resistance | Sheds light rain; hems and eyelets are stitched, so we specify this as water-resistant |
| Indicative service life | Outdoor 1-2 yrs (shorter in high-UV regions) |
| Recommended finishing | Welded or sewn hems, reinforced corners, brass eyelets, pole pockets, rope tunnels |
| Care | Sponge clean with mild detergent and cool water; air dry fully before folding |
| Material & recycling | 100% polyester, mono-material and recyclable through polyester streams |
| Typical weight for this denier | 70-150 g/m² across the industry (uncoated 70-110, PU-coated 110-150) |
| Reinforcement grid | Heavier yarns interwoven on a regular grid, typically 5-8 mm spacing |
Choosing the right specification
Design for the viewing distance before you design for the brand guidelines. A logo that works on a letterhead disappears at fifty metres. Increase stroke weight, drop the detail, and raise the contrast — then check it by viewing the artwork at the same relative distance on screen. For perimeter runs, vented mesh handles wind far better than a solid banner.
How ordering works
- Send your artwork — Upload print-ready artwork at any stage — we check scale, resolution and bleed before anything goes to press and come back to you if something needs adjusting.
- Made to your size — Every panel is cut and finished to your dimensions. Tell us the finished size you need and how it is being fixed, and we will allow for hems and fixings correctly.
- Printed by dye-sublimation — Colour is transferred into the polyester fibre under heat, so the image becomes part of the cloth rather than a layer sitting on top of it.
- Finished and shipped — Hems, eyelets, pole pockets, silicone edge and other finishing are applied before your order is folded, boxed and dispatched worldwide.
Related specifications
This is the 210D version. Other sizes and weights in the same fabric are made to order — tell us the finished dimensions you need and we will quote them.
Technical detail
What the grid does, precisely. Ripstop interweaves heavier reinforcement yarns into the ground cloth on a grid of roughly 5-8 mm. Its documented function is arresting tear propagation rather than raising breaking strength: a tear travelling along the grain meets a reinforcement yarn and stops there. The practical result is that a puncture from a cable tie or a snagged fixing stays a puncture instead of running the length of the panel.
What to expect from service life. Indoors and out of direct sun, printed polyester holds its appearance for five years or more. Outdoors, published ranges for dye-sublimated polyester run from roughly six to twenty-four months depending on how exposed the position is, with the shorter end applying in high-ultraviolet regions such as the Southwest, Florida and the Gulf Coast, and in coastal or high-wind locations. Sheltered and north-facing installations reach the longer end. Coated and tarpaulin-grade constructions extend beyond that band because the coating carries the UV load.
Best suited to
Repeat-use outdoor work where the panel gets handled, folded and re-fixed often — flags, building skins and wraps that travel.
Also in this range
For the smoothest possible print face, our plain Oxford weave is the partner product; for multi-year installations, see our tarpaulin range.
Not sure which fabric is right? Order a free swatch pack and see the weight, texture and finish in your own hands before you commit to a full run.
What you can make with this fabric
Every application this fabric is suited to — tap through for sizes, templates and examples.
