Hi-Vis Orange Promo Banner (115gsm Fluor)

Hi-Vis Orange Promo Banner (115gsm Fluor) — A knit built on a fluorescent ground, so the colour reads hot from a long way off, specified for promotional banners.

Fluorescent pigments re-emit ultraviolet light as visible colour, which is why a fluorescent panel looks brighter than the light falling on it — most noticeably at dawn, at dusk and under overcast skies. Printing onto a fluorescent base keeps that effect live underneath your artwork instead of burying it under ink.

Promotional banners are the everyday workhorse — short campaigns, quick turnarounds, and a need to look sharp for as long as the offer runs and no longer.

Fluorescent orange

Fluorescent orange is the higher-contrast of the two safety colours against green, grey and blue backgrounds — vegetation, tarmac, concrete and sky. It is the usual choice for construction, highway and outdoor-site work, where the panel is seen against the landscape rather than against a building.

Best for

• Storefront and sale-header banners
• Hanging ceiling banners
• Retail promotional walls
• Sidewalk and A-frame inserts
• Feather and forecourt promo flags

Key advantages

• Fluorescent base stays conspicuous in the low, flat light where ordinary colour goes dull
• Reads clearly at distance, which suits safety marshalling, course marking and crowd direction
• Same light knitted handle as our standard flag fabric — packs and rigs the same way
• Dye-sublimated artwork sits over the fluorescent ground without dulling it
• Fast to deploy and easy to store between events

Specifications

Choosing the right specification

Buy for the campaign, not for the decade. If the offer runs six weeks, a light knit does the job at the lowest cost and stores flat for reuse next season. Save the coated wovens for anything going up permanently. If you rotate messaging often, consider a frame system with interchangeable fabric skins — the frame is the capital cost, the graphics are cheap.

How ordering works

• Send your artwork — Upload print-ready artwork at any stage — we check scale, resolution and bleed before anything goes to press and come back to you if something needs adjusting.
• Made to your size — Every panel is cut and finished to your dimensions. Tell us the finished size you need and how it is being fixed, and we will allow for hems and fixings correctly.
• Printed by dye-sublimation — Colour is transferred into the polyester fibre under heat, so the image becomes part of the cloth rather than a layer sitting on top of it.
• Finished and shipped — Hems, eyelets, pole pockets, silicone edge and other finishing are applied before your order is folded, boxed and dispatched worldwide.

Related specifications

This is the 115gsm version. Other sizes and weights in the same fabric are made to order — tell us the finished dimensions you need and we will quote them.

Technical detail

What to expect from service life. Indoors and out of direct sun, printed polyester holds its appearance for five years or more. Outdoors, published ranges for dye-sublimated polyester run from roughly six to twenty-four months depending on how exposed the position is, with the shorter end applying in high-ultraviolet regions such as the Southwest, Florida and the Gulf Coast, and in coastal or high-wind locations. Sheltered and north-facing installations reach the longer end. Coated and tarpaulin-grade constructions extend beyond that band because the coating carries the UV load.

Best suited to

High-visibility work where the panel has to be seen first and read fast — safety marshalling, course marking, sports and event perimeters.

Also in this range

For multi-season outdoor installations, our coated Oxford and PU ranges hold colour longer; for indoor décor, our satin and knit ranges give a softer finish.

Not sure which fabric is right? Order a free swatch pack and see the weight, texture and finish in your own hands before you commit to a full run.