Hi-Vis Orange Hoarding (300D Fluor)

Hi-Vis Orange Hoarding (300D Fluor) — Oxford durability on a fluorescent ground — built for sites where being seen is the job, specified for hoarding banners.

This pairs the dense Oxford construction used across our outdoor range with a fluorescent base colour. You get the handling tolerance and tension behaviour of a woven banner cloth, plus a ground that stays conspicuous in poor light. It is the combination most often specified for construction hoarding, site marshalling and event perimeter work.

Site hoarding is a long-term outdoor graphic in a hostile environment: dust, plant traffic, weather, and the occasional impact. It also has a job to do commercially, usually announcing what is coming and who is building it.

Fluorescent orange

Fluorescent orange is the higher-contrast of the two safety colours against green, grey and blue backgrounds — vegetation, tarmac, concrete and sky. It is the usual choice for construction, highway and outdoor-site work, where the panel is seen against the landscape rather than against a building.

Best for

• Construction-site hoarding
• Retail refit and coming-soon hoarding
• Development marketing panels
• Perimeter site screening
• Safety and wayfinding messaging

Key advantages

• Fluorescent ground stays readable at distance and in the flat light of early morning and dusk
• Dense woven body tolerates cable ties, tension straps and repeated re-fixing
• Opaque, so artwork reads cleanly with no ghost image showing through
• Holds shape across long spans without stretching at the fixing points
• Practical for both temporary site work and season-long installations

Specifications

Choosing the right specification

Work out the campaign length honestly and buy for it. A lightweight banner is genuinely cheaper for a three-month refit; on an eighteen-month development it will need replacing twice and you will pay for the access each time. For anything beyond a season, a coated Oxford or tarpaulin is the lower total cost.

How ordering works

• Send your artwork — Upload print-ready artwork at any stage — we check scale, resolution and bleed before anything goes to press and come back to you if something needs adjusting.
• Made to your size — Every panel is cut and finished to your dimensions. Tell us the finished size you need and how it is being fixed, and we will allow for hems and fixings correctly.
• Printed by dye-sublimation — Colour is transferred into the polyester fibre under heat, so the image becomes part of the cloth rather than a layer sitting on top of it.
• Finished and shipped — Hems, eyelets, pole pockets, silicone edge and other finishing are applied before your order is folded, boxed and dispatched worldwide.

Related specifications

This is the 300D version. Other sizes and weights in the same fabric are made to order — tell us the finished dimensions you need and we will quote them.

Technical detail

What to expect from service life. Indoors and out of direct sun, printed polyester holds its appearance for five years or more. Outdoors, published ranges for dye-sublimated polyester run from roughly six to twenty-four months depending on how exposed the position is, with the shorter end applying in high-ultraviolet regions such as the Southwest, Florida and the Gulf Coast, and in coastal or high-wind locations. Sheltered and north-facing installations reach the longer end. Coated and tarpaulin-grade constructions extend beyond that band because the coating carries the UV load.

Best suited to

Site and safety work that has to stay conspicuous through a full season outdoors — construction hoarding, highway signage and event marshalling.

Also in this range

For multi-year installations, our coated PU and tarpaulin ranges extend service life; for very exposed spans, our vented mesh reduces wind load.

Not sure which fabric is right? Order a free swatch pack and see the weight, texture and finish in your own hands before you commit to a full run.