Hi-Vis Match-Day Flag
Proof before print: every order gets a digital proof for approval. Turnaround: printed in 24–48 h, delivered worldwide in 7–10 days. Trade accounts: volume pricing from 50 sq ft.
Hi-Vis Match-Day Flag — made to your size in a choice of 3 fabrics, from 115gsm to 190gsm.
Sports graphics live outdoors, get handled by crowds, and have to read at genuine distance — from the far side of a pitch, from the back of a stand, or through a television camera.
This product is offered across more than one fabric because the right answer depends on where the panel is going and how long it needs to last. The table below sets every option side by side on the specifications that actually decide the choice — weight, opacity, finish and weather behaviour — so you can compare them directly rather than opening a page for each one.
Best for
- Stadium perimeter and sponsor boards
- Championship and honours banners
- Team and locker-room banners
- Hand-held fan flags
- Match-day and hi-vis marshalling flags
Fabric options compared
| Specification | 115gsm Fluor Orange | 115gsm Fluor Yellow | 300D Fluor Orange |
|---|---|---|---|
| Material & construction | Warp-knitted polyester on a fluorescent dyed base | Warp-knitted polyester on a fluorescent dyed base | High-density Oxford weave on a fluorescent dyed base |
| Yarn denier | n/a (weight-specified) | n/a (weight-specified) | 300D |
| Fabric weight | 115 gsm | 115 gsm | 190 gsm |
| Print method | Dye-sublimation | Dye-sublimation | Dye-sublimation |
| Print sides | Single | Single | Single |
| Opacity | Opaque, fluorescent | Opaque, fluorescent | Opaque, fluorescent |
| Finish & feel | Soft matte knit, high-chroma fluorescent ground | Soft matte knit, high-chroma fluorescent ground | Firm woven surface, high-chroma fluorescent ground |
| Wind & breathability | Breathable — air passes through the knit, so the panel moves rather than loads up | Breathable — air passes through the knit, so the panel moves rather than loads up | Holds form under load; we vent or mesh-panel large spans for exposed positions |
| Water resistance | Uncoated — specified for indoor and sheltered positions | Uncoated — specified for indoor and sheltered positions | Sheds light rain; hems and eyelets are stitched, so we specify this as water-resistant |
| Recommended finishing | Hems, pole pockets, rope-and-toggle, sewn sleeves, reinforced eyelets | Hems, pole pockets, rope-and-toggle, sewn sleeves, reinforced eyelets | Welded or sewn hems, reinforced corners, brass eyelets, tension straps |
| Care | Machine wash cool on a gentle cycle, line dry, cool iron on the reverse only | Machine wash cool on a gentle cycle, line dry, cool iron on the reverse only | Sponge clean with mild detergent and cool water; air dry fully before folding |
Which fabric should you choose?
- 115gsm Fluor Orange — A knit built on a fluorescent ground, so the colour reads hot from a long way off.
- 115gsm Fluor Yellow — A knit built on a fluorescent ground, so the colour reads hot from a long way off.
- 300D Fluor Orange — Oxford durability on a fluorescent ground — built for sites where being seen is the job.
Key advantages
- One product, 3 fabric specifications — compare and choose without leaving the page
- Fluorescent base stays conspicuous in the low, flat light where ordinary colour goes dull
- Reads clearly at distance, which suits safety marshalling, course marking and crowd direction
- Same light knitted handle as our standard flag fabric — packs and rigs the same way
- Dye-sublimated artwork sits over the fluorescent ground without dulling it
Choosing the right specification
Design for the viewing distance before you design for the brand guidelines. A logo that works on a letterhead disappears at fifty metres. Increase stroke weight, drop the detail, and raise the contrast — then check it by viewing the artwork at the same relative distance on screen. For perimeter runs, vented mesh handles wind far better than a solid banner.
How ordering works
- Send your artwork — Upload print-ready artwork at any stage — we check scale, resolution and bleed before anything goes to press and come back to you if something needs adjusting.
- Made to your size — Every panel is cut and finished to your dimensions. Tell us the finished size you need and how it is being fixed, and we will allow for hems and fixings correctly.
- Printed by dye-sublimation — Colour is transferred into the polyester fibre under heat, so the image becomes part of the cloth rather than a layer sitting on top of it.
- Finished and shipped — Hems, eyelets, pole pockets, silicone edge and other finishing are applied before your order is folded, boxed and dispatched worldwide.
Related specifications
Closely related products in this range include Hi-Vis Orange Team Flag (115gsm Fluor Knit), Hi-Vis Yellow Team Flag (115gsm Fluor Knit). They share this fabric and finish, so the choice comes down to format and size.
Best suited to
High-visibility work where the panel has to be seen first and read fast — safety marshalling, course marking, sports and event perimeters.
Also in this range
For multi-season outdoor installations, our coated Oxford and PU ranges hold colour longer; for indoor décor, our satin and knit ranges give a softer finish.
Not sure which fabric is right? Order a free swatch pack and see the weight, texture and finish in your own hands before you commit to a full run.
What you can make with this fabric
Every application this fabric is suited to — tap through for sizes, templates and examples.
