Gallery-Grade Linen Wall Art (300gsm HD Linen)

Gallery-Grade Linen Wall Art (300gsm HD Linen) — Woven from slub yarns to give the irregular texture of linen, with none of linen's bad habits, specified for wall art & tapestry.

The linen look comes from slub yarns — deliberately uneven filaments that alternate thick and thin along their length, woven at a lower pick density to leave the surface open and irregular. That is why the denier figure and the finished weight do not line up the way they would on a tight Oxford: this is a textural cloth, not a heavy-duty one. Unlike real linen it does not crease permanently, shrink in the wash or go limp in humidity.

Fabric wall art occupies a large area for very little weight and no glass, which is why it works where a framed print would be impractical — high walls, rented spaces, hospitality interiors and anywhere a large image needs to go up without a rawlplug in sight.

About this format

Fabric wall art hangs from a rod pocket or a concealed batten, which puts a very large image on a wall with a fraction of the weight and none of the glass a framed print would need. Check your source resolution before scaling up.

Best for

• Large-format tapestries
• Gallery-grade textured wall art
• Diptych and triptych sets
• Panoramic landscape panels
• Statement feature-wall panels

Key advantages

• Genuine slub texture that reads as natural linen at conversational distance
• Does not crease permanently the way real linen does — hangs presentable straight from the box
• Dimensionally stable in humidity, so it will not sag through a long event
• Fully matte, textured surface that suits gallery, church and interior settings
• Machine washable and colour-stable across repeated cleaning

Specifications

Choosing the right specification

Let the texture do some of the work. A slub linen-look or a brushed matte surface gives a large image a physical, hand-made quality that a smooth cloth flattens out — and at wall-art scale that surface is a substantial part of what people respond to. For very large single images, check your source resolution before you scale: fabric is forgiving of softness but not of visible pixels.

How ordering works

• Send your artwork — Upload print-ready artwork at any stage — we check scale, resolution and bleed before anything goes to press and come back to you if something needs adjusting.
• Made to your size — Every panel is cut and finished to your dimensions. Tell us the finished size you need and how it is being fixed, and we will allow for hems and fixings correctly.
• Printed by dye-sublimation — Colour is transferred into the polyester fibre under heat, so the image becomes part of the cloth rather than a layer sitting on top of it.
• Finished and shipped — Hems, eyelets, pole pockets, silicone edge and other finishing are applied before your order is folded, boxed and dispatched worldwide.

Related specifications

This is the 300gsm version. The same specification is also made as Linen-Look Wall Tapestry (800D Linen) — the fabric, print method and finishing are identical across them, so the only decision is which size fits your setup.

Technical detail

Why the denier and the weight do not line up here. Linen-look polyester is woven from slub yarns — filaments deliberately spun uneven, alternating thick and thin along their length — at a lower pick density to leave the surface open and irregular. Published weights for slub constructions run roughly 150-280 g/m², so this cloth sits squarely inside the normal band for its type. Denier here describes an average across thick and thin sections, which is why it should be read as a texture specification rather than as a strength rating.

What to expect from service life. Indoors and out of direct sun, printed polyester holds its appearance for five years or more. Outdoors, published ranges for dye-sublimated polyester run from roughly six to twenty-four months depending on how exposed the position is, with the shorter end applying in high-ultraviolet regions such as the Southwest, Florida and the Gulf Coast, and in coastal or high-wind locations. Sheltered and north-facing installations reach the longer end. Coated and tarpaulin-grade constructions extend beyond that band because the coating carries the UV load.

Best suited to

Interior and gallery settings where texture carries the piece — wall art and tapestry, church and chancel banners, textured backdrops and premium table runners.

Also in this range

For load-bearing outdoor installations, our Oxford and tarpaulin ranges are built for structure.

Not sure which fabric is right? Order a free swatch pack and see the weight, texture and finish in your own hands before you commit to a full run.