Feature Wall Wrap

Feature Wall Wrap — made to your size in a choice of 2 fabrics, from 185gsm.

Building wraps are the largest format we produce and the least forgiving. They are installed at height, they stay up for months or years, and getting one down to fix a problem is expensive — so the specification has to be right before anything is printed.

This product is offered across more than one fabric because the right answer depends on where the panel is going and how long it needs to last. The table below sets every option side by side on the specifications that actually decide the choice — weight, opacity, finish and weather behaviour — so you can compare them directly rather than opening a page for each one.

Best for

• Full and partial facade wraps
• Multi-storey building graphics
• Retail storefront wraps
• Development and hoarding facade panels
• Feature-wall and architectural graphics

Fabric options compared

Which fabric should you choose?

• 300D FR (B1) — The outdoor workhorse — a dense basket weave that takes weather, handling and tension in its stride.
• 300D Wrinkle-Resistant — The outdoor workhorse — a dense basket weave that takes weather, handling and tension in its stride.

Key advantages

• One product, 2 fabric specifications — compare and choose without leaving the page
• Dense weave holds its shape under tension instead of stretching out at the fixing points
• Substantially more abrasion and handling tolerance than knitted alternatives
• Opaque body keeps artwork clean and readable without a ghost image on the reverse
• Takes eyelets and reinforced webbing well, so it survives repeated tie-down cycles

Choosing the right specification

Specify for the wind, then specify for the years. Mesh for anything large and exposed; a coated tarpaulin where the wrap is sheltered and needs to last. Panel large facades rather than attempting a single piece — seamed panels are easier to handle at height, easier to tension evenly, and far easier to replace individually if one is damaged.

How ordering works

• Send your artwork — Upload print-ready artwork at any stage — we check scale, resolution and bleed before anything goes to press and come back to you if something needs adjusting.
• Made to your size — Every panel is cut and finished to your dimensions. Tell us the finished size you need and how it is being fixed, and we will allow for hems and fixings correctly.
• Printed by dye-sublimation — Colour is transferred into the polyester fibre under heat, so the image becomes part of the cloth rather than a layer sitting on top of it.
• Finished and shipped — Hems, eyelets, pole pockets, silicone edge and other finishing are applied before your order is folded, boxed and dispatched worldwide.

Related specifications

Closely related products in this range include Multi-Story Facade Wrap, Retail Storefront Wrap, Small Building Facade Wrap. They share this fabric and finish, so the choice comes down to format and size.

Technical detail

Reading denier and fabric weight together. Denier describes the yarn: grams per 9,000 metres of a single filament. Fabric weight in g/m² describes the finished cloth, and it is set by denier, thread density and any coating. The two do not convert into one another. Published manufacturer ranges for Oxford-weave polyester run roughly 70-150 g/m² at 210D, 130-250 g/m² at 300D, 150-250 g/m² at 450D and 180-550 g/m² at 600D, the upper end of that last band being PVC and tarpaulin-grade builds. Coating accounts for much of the spread, which is why a higher denier is not automatically a heavier cloth.

What to expect from service life. Indoors and out of direct sun, printed polyester holds its appearance for five years or more. Outdoors, published ranges for dye-sublimated polyester run from roughly six to twenty-four months depending on how exposed the position is, with the shorter end applying in high-ultraviolet regions such as the Southwest, Florida and the Gulf Coast, and in coastal or high-wind locations. Sheltered and north-facing installations reach the longer end. Coated and tarpaulin-grade constructions extend beyond that band because the coating carries the UV load.

Best suited to

Outdoor installations that stay up through a season and take real handling — fence lines, site hoarding, scaffold and building wraps, and outdoor trade-show banners.

Also in this range

For soft draped décor, our knit and satin ranges fall into fluid folds; for very exposed spans, our vented mesh sheds the wind load.

Not sure which fabric is right? Order a free swatch pack and see the weight, texture and finish in your own hands before you commit to a full run.