Construction-Site Fence Banner

Construction-Site Fence Banner — made to your size in a choice of 3 fabrics, from 190gsm to 480gsm.

A banner on a fence line is a structural decision as much as a graphic one. Wind loads on a large solid panel are substantial, and they transfer straight into the fence, the posts and whatever is holding those posts in the ground.

This product is offered across more than one fabric because the right answer depends on where the panel is going and how long it needs to last. The table below sets every option side by side on the specifications that actually decide the choice — weight, opacity, finish and weather behaviour — so you can compare them directly rather than opening a page for each one.

Best for

• Chain-link and mesh fence banners
• Sports-field perimeter banners
• Construction-site fence graphics
• Event perimeter and crowd-line banners
• Temporary boundary and marshalling banners

Fabric options compared

Which fabric should you choose?

• 600D Tarpaulin (480gsm) — The heaviest cloth we print — specified when a graphic has to stay up for years, not months.
• 600D WP PU — A polyurethane-backed weave for the jobs that live outside through whatever the season brings.
• 300D WP Stain-Resistant — A polyurethane-backed weave for the jobs that live outside through whatever the season brings.

Key advantages

• One product, 3 fabric specifications — compare and choose without leaving the page
• Longest outdoor service life in the range by a clear margin
• Thick coated construction shrugs off abrasion, grit and repeated tensioning
• Fully opaque, so artwork stays dense and readable in direct sun
• Takes welded hems and heavy-duty eyelets for secure structural fixing

Choosing the right specification

On any exposed run longer than a few metres, use a vented mesh rather than a solid cloth. Mesh lets the wind through instead of catching it, which is the difference between a banner that survives a storm and a fence panel that ends up flat on the ground. Fix at grommets spaced about 24 inches around the full perimeter, adding extra ties at the top, bottom and centre on large or exposed panels, and let the reinforced eyelets carry the load rather than the fabric.

How ordering works

• Send your artwork — Upload print-ready artwork at any stage — we check scale, resolution and bleed before anything goes to press and come back to you if something needs adjusting.
• Made to your size — Every panel is cut and finished to your dimensions. Tell us the finished size you need and how it is being fixed, and we will allow for hems and fixings correctly.
• Printed by dye-sublimation — Colour is transferred into the polyester fibre under heat, so the image becomes part of the cloth rather than a layer sitting on top of it.
• Finished and shipped — Hems, eyelets, pole pockets, silicone edge and other finishing are applied before your order is folded, boxed and dispatched worldwide.

Related specifications

Closely related products in this range include Heavy-Duty Fence Tarpaulin (480gsm). They share this fabric and finish, so the choice comes down to format and size.

Technical detail

Why a heavier coating lasts longer outdoors. Coating mass is what stands between the yarn and ultraviolet light, and UV combined with heat cycling is what ends the life of an outdoor graphic, not water. A tarpaulin-grade coating carries far more mass per square metre than a standard PU finish, which is the reason this construction is specified for installations measured in years rather than months.

What to expect from service life. Indoors and out of direct sun, printed polyester holds its appearance for five years or more. Outdoors, published ranges for dye-sublimated polyester run from roughly six to twenty-four months depending on how exposed the position is, with the shorter end applying in high-ultraviolet regions such as the Southwest, Florida and the Gulf Coast, and in coastal or high-wind locations. Sheltered and north-facing installations reach the longer end. Coated and tarpaulin-grade constructions extend beyond that band because the coating carries the UV load.

Best suited to

Multi-year outdoor installations where the cost of taking a graphic down outweighs the cost of buying a heavier one — building wraps, long-term hoarding and site enclosures.

Also in this range

For portable and hand-carried work, our lighter Oxford and PU ranges are easier to handle; for very exposed spans, our vented mesh reduces wind load.

Not sure which fabric is right? Order a free swatch pack and see the weight, texture and finish in your own hands before you commit to a full run.