Classic Spun Table Cover (140gsm Spun)

Classic Spun Table Cover (140gsm Spun) — Spun yarns instead of smooth filament — a natural, cotton-like texture in a polyester cloth, specified for table covers.

Spun polyester is made from short staple fibres twisted into yarn, the way cotton is, rather than continuous smooth filament. The result has a slightly irregular surface and a dry matte handle that reads as a natural fabric while keeping polyester's colour performance and dimensional stability. It is the middle ground between a technical display cloth and a furnishing textile.

A printed table cover is the hardest-working square metre of branding at any event — it is at eye level for anyone seated, it frames every conversation at the stand, and it hides the cases, cables and clutter underneath.

Best for

• Trade-show table throws
• Fitted stretch tablecloths
• Draped banquet and gala covers
• Table runners and bar runners
• Outdoor and hospitality table covers

Key advantages

• Natural cotton-like texture with the colour performance of polyester
• Fully matte surface that photographs without reflection
• Opaque body with no show-through on the reverse
• Stable and crease-resistant compared with genuine natural fibres
• Machine washable and hard-wearing enough for repeat event use

Specifications

Choosing the right specification

Decide between a throw and a fitted cover first, because they behave completely differently. A loose throw drapes over the table and forgives an inch of size error; a fitted stretch cover pulls tight to the frame and looks far sharper, but it must be cut to your specific table dimensions. Measure the table itself, not the cover you already own.

How ordering works

• Send your artwork — Upload print-ready artwork at any stage — we check scale, resolution and bleed before anything goes to press and come back to you if something needs adjusting.
• Made to your size — Every panel is cut and finished to your dimensions. Tell us the finished size you need and how it is being fixed, and we will allow for hems and fixings correctly.
• Printed by dye-sublimation — Colour is transferred into the polyester fibre under heat, so the image becomes part of the cloth rather than a layer sitting on top of it.
• Finished and shipped — Hems, eyelets, pole pockets, silicone edge and other finishing are applied before your order is folded, boxed and dispatched worldwide.

Related specifications

This is the 140gsm version. Other sizes and weights in the same fabric are made to order — tell us the finished dimensions you need and we will quote them.

Technical detail

What to expect from service life. Indoors and out of direct sun, printed polyester holds its appearance for five years or more. Outdoors, published ranges for dye-sublimated polyester run from roughly six to twenty-four months depending on how exposed the position is, with the shorter end applying in high-ultraviolet regions such as the Southwest, Florida and the Gulf Coast, and in coastal or high-wind locations. Sheltered and north-facing installations reach the longer end. Coated and tarpaulin-grade constructions extend beyond that band because the coating carries the UV load.

Best suited to

Indoor work that wants a natural, textural surface with polyester reliability — table covers, matte backdrops, soft upholstery panels and décor drapes.

Also in this range

For high-sheen décor, our satin range brings the shimmer; for outdoor use, see our coated range.

Not sure which fabric is right? Order a free swatch pack and see the weight, texture and finish in your own hands before you commit to a full run.