Championship Wall Banner

Championship Wall Banner — made to your size in a choice of 3 fabrics, from 240gsm to 300gsm.

Sports graphics live outdoors, get handled by crowds, and have to read at genuine distance — from the far side of a pitch, from the back of a stand, or through a television camera.

This product is offered across more than one fabric because the right answer depends on where the panel is going and how long it needs to last. The table below sets every option side by side on the specifications that actually decide the choice — weight, opacity, finish and weather behaviour — so you can compare them directly rather than opening a page for each one.

Best for

• Stadium perimeter and sponsor boards
• Championship and honours banners
• Team and locker-room banners
• Hand-held fan flags
• Match-day and hi-vis marshalling flags

Fabric options compared

Which fabric should you choose?

• 800D Linen-Look — Woven from slub yarns to give the irregular texture of linen, with none of linen's bad habits.
• 800D HD Linen (300gsm) — Woven from slub yarns to give the irregular texture of linen, with none of linen's bad habits.
• 240gsm FR Stretch (B1) — Four-way stretch that pulls drum-tight into a frame and stays there.

Key advantages

• One product, 3 fabric specifications — compare and choose without leaving the page
• Genuine slub texture that reads as natural linen at conversational distance
• Does not crease permanently the way real linen does — hangs presentable straight from the box
• Dimensionally stable in humidity, so it will not sag through a long event
• Fully matte, textured surface that suits gallery, church and interior settings

Choosing the right specification

Design for the viewing distance before you design for the brand guidelines. A logo that works on a letterhead disappears at fifty metres. Increase stroke weight, drop the detail, and raise the contrast — then check it by viewing the artwork at the same relative distance on screen. For perimeter runs, vented mesh handles wind far better than a solid banner.

How ordering works

• Send your artwork — Upload print-ready artwork at any stage — we check scale, resolution and bleed before anything goes to press and come back to you if something needs adjusting.
• Made to your size — Every panel is cut and finished to your dimensions. Tell us the finished size you need and how it is being fixed, and we will allow for hems and fixings correctly.
• Printed by dye-sublimation — Colour is transferred into the polyester fibre under heat, so the image becomes part of the cloth rather than a layer sitting on top of it.
• Finished and shipped — Hems, eyelets, pole pockets, silicone edge and other finishing are applied before your order is folded, boxed and dispatched worldwide.

Related specifications

Closely related products in this range include Locker Room / Team Banner, Stadium Perimeter Banner, Fan / Hand-Held Team Flag. They share this fabric and finish, so the choice comes down to format and size.

Technical detail

Why the denier and the weight do not line up here. Linen-look polyester is woven from slub yarns — filaments deliberately spun uneven, alternating thick and thin along their length — at a lower pick density to leave the surface open and irregular. Published weights for slub constructions run roughly 150-280 g/m², so this cloth sits squarely inside the normal band for its type. Denier here describes an average across thick and thin sections, which is why it should be read as a texture specification rather than as a strength rating.

What to expect from service life. Indoors and out of direct sun, printed polyester holds its appearance for five years or more. Outdoors, published ranges for dye-sublimated polyester run from roughly six to twenty-four months depending on how exposed the position is, with the shorter end applying in high-ultraviolet regions such as the Southwest, Florida and the Gulf Coast, and in coastal or high-wind locations. Sheltered and north-facing installations reach the longer end. Coated and tarpaulin-grade constructions extend beyond that band because the coating carries the UV load.

Best suited to

Interior and gallery settings where texture carries the piece — wall art and tapestry, church and chancel banners, textured backdrops and premium table runners.

Also in this range

For load-bearing outdoor installations, our Oxford and tarpaulin ranges are built for structure.

Not sure which fabric is right? Order a free swatch pack and see the weight, texture and finish in your own hands before you commit to a full run.