B1 Tension Media Wall (240gsm FR)

B1 Tension Media Wall (240gsm FR) — Four-way stretch that pulls drum-tight into a frame and stays there, specified for media walls.

Stretch knit is what makes tension displays work. The fabric is cut slightly under the frame opening, then stretched into place so the cloth is under constant even tension — that is what produces a wrinkle-free face with no visible sag. It also means the same panel can be fitted, removed and refitted many times without losing its shape.

A media wall exists to put a logo behind a face in a photograph. That single purpose dictates everything: a dead-flat surface, no reflection, no light bleed, and a repeat pattern scaled so a readable logo lands in frame however the subject stands.

Best for

• Press walls and step-and-repeats
• Interview and broadcast backdrops
• Award-show backdrops
• Sponsor and partner walls
• Curved and shaped media walls

Key advantages

• Stretches in all four directions, so it tensions evenly rather than pulling to one axis
• Wrinkle-free face once fitted — creases from shipping pull out under tension
• Fits, removes and refits repeatedly without permanent distortion
• Conforms to curved and shaped frames that a rigid cloth simply cannot follow
• Machine washable between shows, which keeps a repeat-use display looking new

Specifications

Choosing the right specification

Scale the repeat to the crop, not to the wall. A logo grid that looks balanced across the full panel often produces a photograph with two half-logos and nothing legible. Work out the tightest crop the photographers will actually shoot — usually head and shoulders — and make sure at least one complete logo falls inside it. And use a blockout: flash will find any light passing through.

How ordering works

• Send your artwork — Upload print-ready artwork at any stage — we check scale, resolution and bleed before anything goes to press and come back to you if something needs adjusting.
• Made to your size — Every panel is cut and finished to your dimensions. Tell us the finished size you need and how it is being fixed, and we will allow for hems and fixings correctly.
• Printed by dye-sublimation — Colour is transferred into the polyester fibre under heat, so the image becomes part of the cloth rather than a layer sitting on top of it.
• Finished and shipped — Hems, eyelets, pole pockets, silicone edge and other finishing are applied before your order is folded, boxed and dispatched worldwide.

Related specifications

This is the 240gsm version. Other sizes and weights in the same fabric are made to order — tell us the finished dimensions you need and we will quote them.

Technical detail

Fitting a tensioned panel. A silicone-edge or pillowcase graphic is cut marginally smaller than the frame opening so that fitting it puts the cloth under even tension — that is what pulls shipping creases out and holds the face flat. There is no single industry-standard bead size or undersize allowance: both are set by the extrusion profile of your particular frame. Tell us the frame make and model and we will cut and bead to match it.

What to expect from service life. Indoors and out of direct sun, printed polyester holds its appearance for five years or more. Outdoors, published ranges for dye-sublimated polyester run from roughly six to twenty-four months depending on how exposed the position is, with the shorter end applying in high-ultraviolet regions such as the Southwest, Florida and the Gulf Coast, and in coastal or high-wind locations. Sheltered and north-facing installations reach the longer end. Coated and tarpaulin-grade constructions extend beyond that band because the coating carries the UV load.

Best suited to

Tensioned display — SEG walls, pop-up and curved frames, fitted table covers and shaped booth panels that fit, strip and refit across a season.

Also in this range

For free-hanging backdrops and drapes, our soft knit and blockout ranges hang beautifully without a frame.

Not sure which fabric is right? Order a free swatch pack and see the weight, texture and finish in your own hands before you commit to a full run.