B1 Fire-Safe Promo Banner (300D FR)
Proof before print: every order gets a digital proof for approval. Turnaround: printed in 24–48 h, delivered worldwide in 7–10 days. Trade accounts: volume pricing from 50 sq ft.
B1 Fire-Safe Promo Banner (300D FR) — The outdoor workhorse — a dense basket weave that takes weather, handling and tension in its stride, specified for promotional banners.
Oxford weave interlaces heavier yarns in a basket pattern, producing a cloth with a fine ribbed texture and considerably more body than a knit. That structure resists stretch under load, which matters when a banner is tied off across a fence line and left to work through a season of wind. Denier describes the yarn weight, not the fabric weight — a higher denier means a thicker filament, and the finished GSM depends on how densely that yarn is woven.
Promotional banners are the everyday workhorse — short campaigns, quick turnarounds, and a need to look sharp for as long as the offer runs and no longer.
Best for
- Storefront and sale-header banners
- Hanging ceiling banners
- Retail promotional walls
- Sidewalk and A-frame inserts
- Feather and forecourt promo flags
Key advantages
- Dense weave holds its shape under tension instead of stretching out at the fixing points
- Substantially more abrasion and handling tolerance than knitted alternatives
- Opaque body keeps artwork clean and readable without a ghost image on the reverse
- Takes eyelets and reinforced webbing well, so it survives repeated tie-down cycles
- Available across a range of deniers so you can match weight to exposure
Specifications
| Material & construction | Basket-weave (Oxford) polyester, high-denier yarn |
|---|---|
| Yarn denier | 300D |
| Fabric weight | 185 gsm |
| Print method | Dye-sublimation (colour transferred into the fibre) |
| Print sides | Double |
| Opacity | Opaque |
| Finish & feel | Firm woven surface with a fine basket texture |
| Wind & breathability | Holds form under load; we vent or mesh-panel large spans for exposed positions |
| Water resistance | Sheds light rain; hems and eyelets are stitched, so we specify this as water-resistant |
| Indicative service life | Outdoor 1-2 yrs (shorter in high-UV regions) |
| Recommended finishing | Welded or sewn hems, reinforced corners, brass eyelets, pole pockets, rope tunnels |
| Care | Sponge clean with mild detergent and cool water; air dry fully before folding |
| Material & recycling | 100% polyester, mono-material and recyclable through polyester streams |
| Typical weight for this denier | 130-250 g/m² across the industry (base 130-180, rising to about 250 with coating and higher thread density) |
Choosing the right specification
Buy for the campaign, not for the decade. If the offer runs six weeks, a light knit does the job at the lowest cost and stores flat for reuse next season. Save the coated wovens for anything going up permanently. If you rotate messaging often, consider a frame system with interchangeable fabric skins — the frame is the capital cost, the graphics are cheap.
How ordering works
- Send your artwork — Upload print-ready artwork at any stage — we check scale, resolution and bleed before anything goes to press and come back to you if something needs adjusting.
- Made to your size — Every panel is cut and finished to your dimensions. Tell us the finished size you need and how it is being fixed, and we will allow for hems and fixings correctly.
- Printed by dye-sublimation — Colour is transferred into the polyester fibre under heat, so the image becomes part of the cloth rather than a layer sitting on top of it.
- Finished and shipped — Hems, eyelets, pole pockets, silicone edge and other finishing are applied before your order is folded, boxed and dispatched worldwide.
Related specifications
This is the 300D version. Other sizes and weights in the same fabric are made to order — tell us the finished dimensions you need and we will quote them.
Technical detail
Reading denier and fabric weight together. Denier describes the yarn: grams per 9,000 metres of a single filament. Fabric weight in g/m² describes the finished cloth, and it is set by denier, thread density and any coating. The two do not convert into one another. Published manufacturer ranges for Oxford-weave polyester run roughly 70-150 g/m² at 210D, 130-250 g/m² at 300D, 150-250 g/m² at 450D and 180-550 g/m² at 600D, the upper end of that last band being PVC and tarpaulin-grade builds. Coating accounts for much of the spread, which is why a higher denier is not automatically a heavier cloth.
What to expect from service life. Indoors and out of direct sun, printed polyester holds its appearance for five years or more. Outdoors, published ranges for dye-sublimated polyester run from roughly six to twenty-four months depending on how exposed the position is, with the shorter end applying in high-ultraviolet regions such as the Southwest, Florida and the Gulf Coast, and in coastal or high-wind locations. Sheltered and north-facing installations reach the longer end. Coated and tarpaulin-grade constructions extend beyond that band because the coating carries the UV load.
Best suited to
Outdoor installations that stay up through a season and take real handling — fence lines, site hoarding, scaffold and building wraps, and outdoor trade-show banners.
Also in this range
For soft draped décor, our knit and satin ranges fall into fluid folds; for very exposed spans, our vented mesh sheds the wind load.
Not sure which fabric is right? Order a free swatch pack and see the weight, texture and finish in your own hands before you commit to a full run.
What you can make with this fabric
Every application this fabric is suited to — tap through for sizes, templates and examples.
